Rolled sheets and plates
Categories
Stainless sheets and plates
1.4306
- X2CrNi19-11
- X5CrNi18-10
- AISI 304
- X2CrNi18-9
- AISI 304L
- X10CrNi18-8
- AISI 301
- X6CrNiTi18-10
- AISI 321
- X6CrNiMoTi17-12-2
- AISI 316Ti
- X5CrNiMo17-12-2
- AISI 316
- X2CrNiMo17-12-2
- AISI 316L
- X2CrNiMo18-14-3
- X3CrNiMo17-13-3
- X2CrNiMo17-12-3
- AISI 316LMo
- X2CrNiMo18-15-4
- AISI 317L
- X6CrNiNb18-10
- AISI 347
- X1NiCrMoCu25-20-5
- AISI 904L
- X1CrNiMoCuN20-18-7
- 254SMO
- X1NiCrMoCuN25-20-7
- Alloy 926
- X12Cr13
- AISI 410
- X6Cr13
- AISI 410S
- X20Cr13
- AISI 420
- X46Cr13
- AISI 420
- X105CrMo17
- AISI 440C
- X90CrMoV18
- AISI 440B
- X17CrNi16-2
- AISI 431
- X3CrNiMo13-4
- F6NM
- X5CrNiCuNb16-4
- 17-4PH
- X5CrNiCuNb15-5
- 15-5PH
- X7CrNiAl17-7
- 17-7PH
- X1CrNiMoAl12-9
- 13-8Mo
- X2CrNi12
- AISI 410L
- X6Cr17
- AISI 430
- X2CrTi12
- AISI 904L
- X2CrTiNb18
- AISI 441
- X2CrMoTi18-2
- AISI 444
- X2CrNiN23-4
- S32304
- X2CrMnNiN21-5-1
- S32101
- X2CrNiMoN22-5-3
- S32205
- S31803
- X2CrNiMoN25-7-4
- S32750
- X2CrNiMoCuWN25-7-4
- S32760
- X2CrNiMoCuN25-6-3
- S32550
- S20910
- XM-19
- X50CrMoV15
- X2CrNiMoN17-13-3
- AISI 316LN
Heat resistant sheets and plates
1.4713
- X10CrAl7
- X10CrAl13
- Z13C13
- X10CrAl18
- Z12CAS18
- X10CrAl24
- AISI 446
- X8CrTi25
- X6CrNi18-10
- AISI 304H
- X8CrNiTi18-10
- AISI 321H
- X15CrNiSi20-12
- AISI 309
- X15CrNiSi25-21
- AISI 310
- X8CrNi25-21
- AISI 310S
- X12CrNi23-13
- AISI 309S
- X12NiCrSi35-16
- Alloy 330
- X9CrNiSiNCe21-11-2
- 253MA
1.4876
- X10NiCrAlTi32-21
- Alloy 800
Pressure vessel boiler sheets and plates
Sheets and plates for Quenching and tempering, nitriding
16MnCr5
- 1.7131
- 1.7147
- 1.7218
- A829/A505/A506 Gr. 4130
- 1.7225
- A829/A505/A506 Gr. 4140
C15
C22E - 1.0401
- C15E
- 1.1141
- 1.1151
- st20
C60
- 1.0601
- C60E
- 1.1221
C60W
- 1.1740
Spring steel sheets and plates
Abrasive wear resistant sheets, plates
Tool steel sheets and plates
1.2067
- 102Cr6
- 80CrV2
- 75Cr1
1.2345
- X50CrMoV5-1
1.2703
1.2379 - 72NiCr2
- X153CrMoV12
- 105WCr6
- 100MnCrW4
- HS6-5-2-5
- 90MnCrV8
- HS6-5-2C
- HS18-0-1
We divide the sheets into thin and thick sheets.
The offer of the VIRGAMET company includes Sheet Metal:
- Sheets and plates made of thermal improvement steel
- Spring, carbon and alloy plates
- Carburizing plates
- High-manganese wear-resistant steel sheets (Hadfield steel)
- Chromium heat-resistant sheets, chromium-nickel sheets with aluminum, silicon, molybdenum, titanium additives etc.
- Heat and creep resistant steel sheets
- Stainless, acid-resistant, corrosion-resistant quarto sheets
- Alloy sheets for heat-chemical treatment
- Corrugated Corten sheets resistant to atmospheric corrosion
- Manganese spring sheets 65G
- Chromium-molybdenum sheets
- Steel sheets of duplex type. superduplex
- Chromium-manganese-silicon sheets
- Ferrite and martensitic chromium sheets
- Nitriding sheets
- Tool steel sheets for hot and cold working
- Tool sheets for shallow and deep quenching
- Steel sheets of high-speed steel
- Titanium and titanium alloys sheets
- Nickel plates for low temperature operation
- Boiler sheets for operation at higher temperatures and for pressure equipment
- Bearing steel sheets
- Superalloys sheets - nickel, chromium-nickel
- Sheets of pure ARMCO iron
- Hydrogen-resistant sheets at high pressures
- Rolled sheets
Cold-rolled sheets made from stainless steel, duplex, heat-resistant steel, quenching and temperting steel, and spring steel
- Cold rolled carbon structural alloyed steel sheets 0.5 to 4.0mm thick.
- Formats: width 600 - 1500mm, length 2000 - 6000mm
- Cold-rolled corrosion-resistant, acid-resistant, heat-resistant and stainless steel sheets 0.3 to 15mm thick.
- Formats: width 360 - 2150mm, length 2000 - 8000mm
| Surface of cold-rolled, corrosion-resistant, heat-resistant, galvanized sheets | |||
|---|---|---|---|
| 2D | Pickled | Smooth | With heat treatment |
| 2B | Straight and pickled | Smoother than 2D | |
| BA / 2R | Straight and pickled | Mirror + Foil | |
| 2E | Surface without scale | Rough matte | |
| 2C | Surface with scale | Smooth | |
Hot-rolled, stainless, boiler, carburizing, wear-resistant, bearing, carbon, tool, high speed plates
- Hot-rolled sheets of carbon steel structural alloy 2 to 600mm thick.
- Formats: width 1000 - 3000mm, length 2000 - 12000mm
- Hot-rolled, corrosion-resistant, acid-resistant, heat-resistant and stainless steel sheets 2 to 200mm thick.
- Formats: width 500 - 2500mm, length 2000 - 12000mm
| Surface of hot-rolled, corrosion-resistant and heat-resistant sheets | |||
|---|---|---|---|
| 1C | Surface with scale | rough | With heat treatment |
| 1D | Pickled surface | ||
| 1E | Surface without scale | No heat treatment | |
| 1U | Surface with scale | ||
Special surfaces of stainless and acid-resistant sheets available on request.
| Special surfaces of corrosion resistant plates | |
|---|---|
| 3N | Sheet sanded with abrasive grain 80-120 |
| 4N / 4TK | Sheet sanded with abrasive grain 150-400 |
| 1K / 2K | Sheets polished to a gentle gleam |
| 1P / 2P | Sheets polished for a mirror effect |
| 1M / 2M | Decorative sheets |
| SB | Brushed sheets |
Cutted elements from sheets/plates by saw, plasma, laser and waterjet
| Cut or burned elements of sheet metal | |
|---|---|
| Gas-plasma cut parts | thickness up to 300mm |
| Laser cut parts | thickness up to 30mm< |
| Saw cut elements | thickness up to 1000mm |
| Water cut elements | thickness up to 150mm |
- rings or discs with a hole burnt from sheets,
- discs, full wheels burnt from sheets,
- Forms, cubes, calcines burnt or cut from sheet metal,
- burnt elements according to technical drawings,
- flat bars cut from steel plates and forged blocks,