34CrAlNi7-10, 34CrAlNi7, 1.8550 - nitriding steel
Alloyed structural boiler steel for nitriding 34CrAlNi7-10, 34CrAlNi7, 1.8550, 1.2891 for work at elevated temperatures.
| Standard | Steel Grade | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Chemical Composition % | |||||||||
| C: | Mn: | Si: | P: | S: | Cr: | Mo: | Ni: | Al: | |
| PN | 33H2NMJ | ||||||||
| 0.30 - 0.37 | 0.4 - 0.6 | 0.15 - 0.35 | <0.025 | <0.025 | 1.5 - 1.8 | 0.15 - 0.25 | 0.9 - 1.1 | 0.8 - 1.1 | |
| EN | 34CrAlNi7-10 - 1.8550 | ||||||||
| 0.30 - 0.37 | 0.4 - 0.7 | <0.4 | <0.025 | <0.035 | 1.5 - 1.8 | 0.15 - 0.25 | 0.85 - 1.15 | 0.8 - 1.2 | |
| DIN | 34CrAlNi7 - 34 CrAlNi 7 - 1.2891 | ||||||||
| 0.30 - 0.37 | 0.4 - 0.7 | <0.4 | <0.025 | <0.035 | 1.5 - 1.8 | 0.15 - 0.25 | 0.85 - 1.15 | 0.8 - 1.2 | |
34CrAlNi7-10, 1.8550 - specifications and application
34CrAlNi7 is intended for work at elevated temperatures in an environment that requires high sliding properties, corrosion, temperature, abrasion, and fatigue resistance. Steel with the addition of Nickel and Aluminum used in the energy, machinery, and automotive industries for large cross-sections elements in the heat treated condition. The products are used in the manufacture of screws, rods, cylinders, pistons, gears, extruders, and rings, which do not require welding.
Mechanical properties of 34CrAlNi7-10, 1.8550
- Dimensions 16 - 40mm
- Tensile strength, Rm: 900 - 1100 MPa
- The yield point, Re: > 680 MPa
- Elongation, A:> 10%
- Impact resistance, KV20℃: >30J
- Dimensions 40 - 100mm
- Tensile strength, Rm: 850 - 1050 MPa
- The yield point, Re: > 650 MPa
- Elongation, A:> 12%
- Impact resistance, KV20℃: >30J
- Dimensions 100 - 250mm
- Tensile strength, Rm: 800 - 1000 MPa
- The yield point, Re: > 600 MPa
- Elongation, A:> 13%
- Impact resistance, KV20℃: >35J
- Hardness in +A condition: <248 HB
- Hardness of nitrided surface, HV1: 950
Heat treatment of 34CrAlNi7-10, 1.8550:
- Softening annealing at a temperature of 650 - 700 ℃
- Hardening at 870 - 930 ℃ for at least half an hour with cooling in water or oil
- Tempering at 580 - 700℃ for a minimum of 700 hour
- Nitriding at a temperature of 480 - 570℃
In the above mentioned grades the company provides:
Substitutes, equivalents and other species designations
33H2NMJ
1.8550
34CrAlNi7
34CrAlNi7-10
1.2891
34 CrAlNi 7
34 CrAlNi 7-10
Need help? Contact us!
Call or send a message, and our representative
will contact you within 24 hours!
Write
Call
