16Mo3, 1.5415, 15Mo3 - boiler steel
Low-alloy boiler steel 16Mo3, 16M, 15Mo3, 1.5415 according to PN-75/H-84024, DIN 17243, EN 10273, EN 10222-2.
| Standard | Steel Grade | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Chemical Composition % | |||||||||||||
| C: | Mn: | Si: | P: | S: | Cr: | Mo: | Ni: | Cu: | Al: | N: | |||
| EN/DIN | 16Mo3 - 15Mo3 - 1.5415 | ||||||||||||
| 0.12 - 0.20 | 0.4 - 0.9 | <0.35 | <0.025 | <0.010 | <0.3 | 0.25 - 0.35 | <0.3 | <0.3 | - | <0.012 | |||
| PN | 16M | ||||||||||||
| 0.12 - 0.20 | 0.5 - 0.8 | 0.15 - 0.35 | <0.040 | <0.040 | <0.3 | 0.25 - 0.35 | <0.35 | <0.25 | <0.012 | - | |||
| EN | 17Mo3 | ||||||||||||
| 0.12 - 0.22 | 0.4 - 0.9 | <0.4 | <0.025 | <0.015 | - | 0.25 - 0.35 | - | - | - | - | |||
| NF | 15D3 | ||||||||||||
| <0.18 | 0.5 - 0.8 | 0.15 - 0.35 | <0.035 | <0.030 | <0.3 | 0.25 - 0.35 | - | - | - | - | |||
16Mo3, 1.5415 - specifications and application
16Mo3 steel is used in the production of furnaces, parts of steam boilers, pressure vessels, heat exchangers, collective chambers, chemical equipment parts, hot gas distributors, bolts, flanges, nuts, coils, collectors and other energy equipment. Weldable grade.
Mechanical properties of 16Mo3, 1.5415 according to EN 10273
- Dimensions <16mm
- Tensile strength, Rm: 440 - 590 MPa
- The yield point, Rp0.2 >275 MPa
- Elongation, A > 24%
- Dimensions 16-40mm
- Tensile strength, Rm: 440 - 590 MPa
- The yield point, Rp0,2 >270 MPa
- Elongation, A > 24%
- Dimensions 40-60mm
- Tensile strength, Rm: 440 - 590 MPa
- The yield point, Rp0,2 >260 MPa
- Elongation, A > 23%
- Dimensions 60-100mm
- Tensile strength, Rm: 430 - 580 MPa
- The yield point, Rp0,2 >240 MPa
- Elongation, A > 22%
- Dimensions 100-150mm
- Tensile strength, Rm: 420 - 570 MPa
- The yield point, Rp0,2 >220 MPa
- Elongation, A > 19%
- Impact energy, KV20℃ >40 J
Strength properties at elevated temperatures of 16Mo3, 1.5415
| Temperature (℃) | 200 | 250 | 300 | 350 | 400 | 450 | 500 |
|---|---|---|---|---|---|---|---|
| The yield point Rp0.2 (MPa) | 215 | 200 | 170 | 160 | 150 | 145 | 140 |
| Temperature (℃) | 450 | 470 | 490 | 510 | 530 |
|---|---|---|---|---|---|
| Creep strength, Rz/100000 (MPa) | 239 | 178 | 123 | 81 | 53 |
| Creep limit, R1/100000 (MPa) | 167 | 126 | 89 | 59 | 36 |
Heat and plastic treatment
- Rolling and forging at a temperature of 1100 - 850 ℃
- Normalizing annealing at temperatures of 890 - 950℃
- Relief annealing at a temperatures of 520 - 580℃
In the above mentioned grades the company provides:
Substitutes, equivalents and other species designations
17Mo3
16Mo3
15Mo3
15D3
20M
JIS STBA 12
CSN 15020
BS 243
TS26
K7
ASTM A161-70 Grade T1
MNC831
3Mo
0.3Mo
16 Mo 3
15 Mo 3
15 D3
SA335 A335 grade P1
P2
A516 SA516 Grade 65
70
75
51.5415
Need help? Contact us!
Call or send a message, and our representative
will contact you within 24 hours!
Write
Call
