100CrMo7, 1.3537 - bearing steel
Structural bearing steel 100CrMo7, 100CrMo7-3, 1.3537, 1.3536 with Molybdenum additive according to ISO 683-17.
| Standards | Steel Grades | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Chemical Composition % | |||||||||||
| C: | Mn: | Si: | P: | S: | Cr: | Mo: | Ni: | Al: | Cu: | O: | |
| ISO | 100CrMo7 - 100 CrMo 7 - 1.3537 | ||||||||||
| 0.93 - 1.05 | 0.25 - 0.45 | 0.15 - 0.35 | <0.025 | <0.030 | 1.65 - 1.95 | 0.15 - 0.30 | - | <0.05 | <0.3 | <0.0015 | |
| ISO DIN | 100CrMo7-3 - 100 CrMo 7-3 - 1.3536 | ||||||||||
| 0.93 - 1.05 | 0.60 - 0.80 | 0.15 - 0.35 | <0.025 | <0.030 | 1.65 - 1.95 | 0.20 - 0.35 | - | <0.05 | <0.3 | <0.0015 | |
| AFNOR | 100CrMo7-2 - 100 CrMo 7-2 - 100CD7 | ||||||||||
| 0.90 - 1.05 | 0.25 - 0.45 | 0.20 - 0.40 | <0.025 | <0.015 | 1.65 - 1.95 | 0.15 - 0.30 | <0.3 | <0.05 | <0.3 | - | |
| ISO | 100CrMo7-4 - 100 CrMo 7-4 - 1.3538 | ||||||||||
| 0.93 - 1.05 | 0.60 - 0.80 | 0.60 - 0.80 | <0.025 | <0.030 | 1.65 - 1.95 | 0.4 - 0.5 | - | <0.05 | <0.3 | <0.0015 | |
| AFNOR | 100CrMo8-3 - 100 CrMo 8-3 | ||||||||||
| 0.90 - 1.05 | 0.60 - 0.80 | 0.20 - 0.40 | <0.030 | <0.015 | 1.70 - 1.95 | 0.15 - 0.30 | <0.3 | <0.05 | <0.3 | - | |
| DIN | 100CrMo5 - 100 CrMo 5 - 1.2303 | ||||||||||
| 0.90 - 1.10 | 0.20 - 0.40 | 0.15 - 0.30 | <0.035 | <0.035 | 1.10 - 1.30 | 0.20 - 0.40 | - | - | - | - | |
100CrMo7, 100CrMo7-3 - specification and application
The 100CrMo7 and 100CrMo7-3 grades are chromium high-purity steels with high hardness, equivalent to tool steels, and with significant resistance to fatigue stress.
The 100CrMo7 material is a much better alternative and the equivalent of the 100Cr6 material. Molybdenum-containing products have better hardening capacity and can be used with much larger cross-sections compared to the 100Cr6 grade.
The remaining properties of the material are approximate to the original. Products in the aforementioned grades are used for the manufacture of bearings, parts of certain machines, medium-sized bearings, ball bearings, rollers and rings.
Mechanical properties
- Hardness in spheroidized annealing condition +AC: < 217 HB
- Hardness in spheroidized annealing condition after drawing +AC+C: < 251 HB
- Hardness of tubes and sleeves <321 HB
- Density ρ 7,79 g/cm3
Heat treatment
- Spheroidizing annealing at 820 - 890 ℃ in air
- Normalising annealing at 880 - 910 °C in air
- Hardening to achieve martensitic structure with cooling in oil at 840 - 880 ℃
- Hardening to achieve a bainitic structure with cooling in a salt bath at 850 - 875 ℃
- Tempering at 150 220℃ C with cooling in ait
- Relief annealing at 550 - 650℃
Virgamet company in the beforementioned grade provides
Substitutes, equivalents and other species designations
100 CrMo 7-3
100CrMo7-3 mod. Q
100CrMo7 mod. T
100CrMo7-4
1.3538
100 CrMo 7-4
100 CrMo 7
100CD7
100 CD 7
100CrMnMo7
100 CrMnMo 7
100 CrMo 5
100CrMo5
100CrMo6
100CrMo8-3
100CrMo7-2
100CrMo72
100CrMo73
100CrMo74
100CrMo83
CSN 19501
F-520.F
K19965
Need help? Contact us!
Call or send a message, and our representative
will contact you within 24 hours!
Write
Call
