Forgings, forged bars, forged flat bars, and die forgings:

Forged bars and forgings are produced by forging under a hammer, in dies, or with a press of heated steel at a suitable temperature. Shape is produced by hitting or pressing of the anvil. The VIRGAMET's range of forged products includes:

  • Forged bars, forgings and shafts of carbon, machine, structural, non-alloy steel
  • Forged bars, forgings of manganese, spring and abrasion resistant steel
  • Forged bars, forgings of high grade austenitic 11G12 steel
  • Forged bars, forgings and shafts from alloy steel for heat treatment
  • Forged rods and forging made from SilChrom – SiCr valve steel
  • Forged bars and forgings from special and quality steels for general technical applications
  • Forged bars and forgings, heat-resistant and hot-forged, for work in high temperatures
  • Forged and forgings for carburizing, nitriding and cyanidizing
  • Forged bars and forgings for curing and surface hardening
  • Forged bars and forgings from tool steel for hot and cold work
  • Forged and forgings bars, stainless and acid-resistant
  • Forged and titanium forgings made from titanium alloys
  • Forged bars and forgings made from duplex stainless two-phase steel
  • Forged bars, forgings and shafts for thermal improvement without nickel and molybdenum
  • Ferritic, martensitic and austenitic forged bars and forgings
  • Forged bars, forgings made from alloy spring steel
  • Forged bars, forgings and shafts made of high-alloyed steel
  • Forged bars and forgings for work in elevated and high temperatures
  • Forged bars and forgings made from nickel steel for use in low temperatures
  • Forged bars, forgings and shafts for pressure equipment
  • Forged bars and forgings made of precipitation hardened steel with microdadditives
  • Forged bars and forgings made from bearing steel for elements of rolling bearings
  • Forged bars and forging made from high-speed steel
  • Forged bars and forgings for heat-chemical treatment

Forgings, shafts, bars and other forged goods for individual applications as components and subassemblies in various industries:

  • Forgings of regular cross-section, round, square, rectangular and even hexagonal
  • Forgings of multiflanged shafts, thrust shafts, countershafts
  • Forgings of66​ symmetrically weaned shafts
  • Forgings for heavy-duty toothed gears, sprockets, and piston pins
  • Forgings for springs for motor vehicles
  • Forging for crankshafts, for pipes connectors
  • Forgings of eccentric shafts
  • Forgings of drive shafts of machinery and camshafts
  • Forgings for turbine blades, shafts for turbines and turbogenerators
  • Forgings for screws, turbine rotors, boilers parts,
  • Forgings for crankshaft main bearing journals
  • Forgings for ship's steering parts
  • Forgings for clamping screws, locomotive axles, block headers for railway industry
  • Forgings for railway and wagon axles, wagon pull rods
  • Forgings for heavy-duty parts of machines and engines in the automotive and aerospace industries
  • Forged rolls, heat-treated for cold rolling
  • Forgings for pins, for the part of aviation equipment
  • Forgings for parts for equipment for astronautics
  • Forgings for die inserts, cutting boards, hot cutting knives
  • Forged bars and forgings for special drills, supporting rolls

 

The table provides a simple list of nomenclature for individual products manufactured by forging:

Forgings, bars, shafts and other forged goods
Forgings according to the technical drawing

the softened state

softening annealing (M)

Mass of forgings max. 300 Tons
Forged round bars, forged flat bars, forged square bars, forged hexagonal bars
Forged round, flat, square bars on swaging machine
Forged flat bars

Normalized state

Normalizing annealing

normalizing annealing with tempering

Forged disk
Disks with pierced opening
Forged cubes
Forged plates and blocks
Shaft forgings

heat-treated state (QT)

hardened state

Shaped forgings
Forgings with offsettings
Beater forgings
Open-die Forgings
Forged rings, forged and rolled, and beckedsupersaturated state
Sleeves forged on the spindle
Forged sleeves with offsettings
Bored and becked sleeves
Closed-die forgings

The products described above are determined by:

- Polish norms - PN-H-94004, PN-H-94009, PN-H-94010, PN-H-94300, PN-H-94301, PN-H-94302, PN-H-94303, PN-H-94022, PN-H-94304, PN-H-94305, PN-H-94500, PN-H-93003, PN-H-93005, PN-H-93008, PN-H-93013, PN-H-93015, PN-H-84027.02, PN-H-84027.04,

- Euronorms - PN-EN 10250-1, PN-EN 10250-2, PN-EN 10250-3, PN-EN 10250-4, PN-EN 10222-1, PN-EN 10222-2, PN-EN 10222-3, PN-EN 10222-4, PN-EN 10222-5


THIS WEBSITE USES COOKIES TO IMPROVE AND FACILITATE YOUR ACCESS TO THE WEBSITE AND TO KEEP STATISTICS. IF YOU CONTINUE TO USE THIS SITE, YOU AGREE THAT THE COOKIES WILL BE STORED ON YOUR DEVICE
PRIVACY POLICY
How do I disable cookies
AGREE